VillaAula
Log in
Lesson 1 / 4

SPECS · THE LANGUAGE OF INSTRUCTION

Reading a specification

Pro tip — how it's said in English

Specs use a tight, repeatable grammar so nothing is ambiguous:

  • shall / is to be = mandatory: All steel shall be galvanised.
  • provide / install / supply = the contractor's verbs.
  • exact references, no adjectives of opinion: to BS EN 1090, not good quality.

If a word could be read two ways, a spec rewrites it until it can't.

Progress0 / 3 correct
📑

Three clauses

Clause 1: "All external steelwork shall be hot-dip galvanised to BS EN ISO 1461." Clause 2: "The contractor is to provide and install three coats of paint to all exposed timber." Clause 3: "Provide movement joints at maximum 6 m centres." Notice: no opinions, no 'nice', no 'about'. Every clause says exactly what, exactly how much, and to exactly which standard.

1

Which word makes Clause 1 a mandatory instruction?

2

“Provide movement joints at maximum 6 m centres” gives an exact, checkable limit.

3

A spec avoids vague praise. Replace “good quality paint, about three coats” — how many coats does Clause 2 require? (a number)

Saved on this device